 |
|
 |
 |
 |
| WX4X989 |
WR60X187 |
| 2 Watt CW
GE condenser motor. For general purpose use. CW opposite shaft end
115v with lead wires. This motor will replace almost all other condenser
motors. |
2 Watt CW GE condenser
motor. Exact with 3-pin terminals. Replaces WR60X179 & 12001314. |
| |
|
 |
|
| WR60X177 |
|
| 2 Watt CW GE condenser
motor. Exact with spade terminals. |
|
|
| |
|
|
|
|
|
| 9" |
For new side by side refrigerators.
High heat and single tube. The WR51X10053 is an optional replacement
for dual element heaters. It includes the wiring harness and WR50X122
thermostat. |
575 |
WR51X10053 |
 |
| 12" |
725 |
WR51X10055 |
|
| 7-1/2" |
Most popular glass tube
defrost heater kits. Includes plug-in harness and clip-on terminator. |
WR51X442 |
 |
| 10-1/2" |
WR51X443 |
|
Original Glass Part Number |
Length |
New Steel Part Number |
WR51X314 |
25" |
|
WR51X319 |
19-1/2" |
|
WR51X317 |
21-1/2" |
|
|
Part Number |
Length |
|
|
9-1/4" |
|
11-3/4" |
|
Part Number |
Length |
|
|
23-3/4" |
|
22-3/4" |
|
14-3/4" |
|
21-3/4" |
|
|
|
|
|
|
| |
| WR55X10552 |
Main board assembly for Side-by-Side & Top-Freezer
electronic refrigerators with single evaporator & single speed compressors.
This board replaces WR55X10335, WR55X10151, WR55X10024, WR55X10037, WR55X10045,
WR55X10056, WR55X10065, WR55X10079, WR55X10083, WR55X10090, WR55X10097,
WR55X10109, WR55X10110, WR55X10160, WR55X10171, WR55X10174, WR55X10187,
WR55X10188, & WR55X10228. |
|
| |
|
|
| WR50X10068 |
Hi-Limit defrost thermostat for refrigerators using the
main board assembly. This is a L140-30 with flat clip thermostat. This
thermostat replaces WR50X10054. |
 |
| |
|
|
| WR55X10025 |
GE main board thermister. 18" wires and 5/16" in diameter. |
 |
| |
|
Cycle (Hours) |
Defrost Time |
Description |
Part Number |
|
| 6 |
25 Minutes |
Wire terminals are bent and wires are movable. |
WR9X480 |
 |
| 6 |
25 Minutes |
Wire terminals are bent and wires are movable.
This timer is a kit. |
WR9X331 |
| 8 |
30 Minutes |
Wire terminals are bent and wires are not movable. |
WR9X482 |
| 10 |
35 Minutes |
Wire terminals are straight and wires are not
movable. |
WR9X483 |
| 16 |
35 Minutes |
Wire terminals are straight and wires are not
movable. |
WR9X489 |
| 6 |
25 Minutes |
Wire terminals are straight and wires are not
movable. |
WR9X502 |
| 15 |
44 Minutes |
Wire terminals are straight and wires are not
movable. |
WR9X520 |
| |
|
Old style defrost timer. Metal motor with visible
fly wheel and movable wires. |
WR9X330DS |
 |
|
|
|
|
GE refrigerator door light switch. |
|
|
GE refrigerator door light switch. |
|
|
GE refrigerator door fan and light switch. |
|
| |
|
|
|
WR60X162 |
WR60X5073 |
WR60X114 |
| GE evaporator
motor kit. CCW (counter clockwise) rotation shaft end. Kit includes
new front bracket and instructions. |
GE evaporator
motor kit. Clockwise shaft end. Includes 5" plastic blade, wire
terminals, and instructions. |
GE 5 wing
plastic fan blade for 1/8" shaft evaporator motors. This is a
CCW(counter clockwise) 4-1/4" diameter fan blade which replaces
the 3 and 4 wing blades. |
| |
|
|
WR60X123 |
WR60X253 |
WR60X10172 |
| GE 5 wing
plastic fan blade for 1/8" shaft evaporator motors. This is a
CW(clockwise) 4-1/4" diameter fan blade which replaces the 3 and
4 wing blades. |
GE evaporator
motor in plastic box. 115 volt CW rotation motor with a 1/8" shaft
1" long. |
New style
motor fits the latest GE refrigerators. 115 volts, 7.4 watts, 3/8" stack,
CCW rotation with a 1/8" shaft that is 2-1/4" long. 3 wire
terminal block. Replaces part numbers WR60X10117 and WP60X10057. |
| |
|
|
WR60X10185 |
|
|
| GE 9.75 volts
D.C. evaporator motor. This motor blows upward through evaporator in freezer
compartment. 4- wire harness 12" long. 1/8" shaft. This is the
newest style GE evaporator motor. Replaces WR60X10154. |
|
|
| |
|
|
|
|
 |
WR60X188 |
1/8" shaft 1" long. 3/8" stack - CCW shaft end. |
 |
WR60X190 |
1/8" shaft 1" long. 3/8" stack - CCW shaft end. |
 |
WR60X191 |
1/8" shaft 1" long. 3/8" stack - CCW shaft end. |
 |
WR60X203 |
1/8" shaft 1" long. 3/8" stack - CCW shaft end. |
 |
WR60X10008 |
1/8" shaft 1-3/4" long. 3/8" stack - CCW shaft end. |
|
 |
Latest IM6 Electronic Ice Maker Kit replaces
IM3, IM4, IM5 and prior IM6 kits.
Kit Includes:
- Ice Maker Assembly
- Inlet valve, tubing and fill tubes.
- Both types of fill cups.
- Ice Storage Bucket.
- Power cord adapters, 4 pin and 6 pin.
- Screws and other small parts.
- Complete instructions.
Order IM6 Ice Maker Kit |
| |
|
|
 |
Late Model Ice Maker with bracket attached. Also comes
with extra wide deflector.
Order WR30X10001 |
| |
|
|
 |
Bare Electronic Ice Maker.
Includes:
- Power cords, 4 and 6 pin.
- End mounted fill cup.
- Replaces WR30X328 and WR30X10014
Order WR30X10061 |
| |
|
|
|
|
|
|
|
|
|
|